Size Guide for Rings, Bracelets & Necklaces

Find your ring size

Note that fingers can be different sizes:
The size of your fingers can vary depending on the time of day, temperature and activity level. Measure your ring size under different conditions to ensure that the ring always fits well.

Consider the width of the ring:
Wider rings can fit tighter than narrower rings. Therefore, if you want to buy a wider ring, you may want to choose a slightly larger size to ensure that it fits comfortably.

Use a tape measure or string

Even without a ring sizer, you can easily measure the circumference of your finger.

  1. Use a tape measure or a piece of string and wrap it around the finger on which you want to wear the ring. Make sure that the tape measure or string also fits around the knuckle, as some people's knuckles are wider than the base of their fingers.
  2. Mark the point of the tape measure or cut the string where the end encloses the finger and then measure the length with a ruler. This is usually given in millimetres and has the value of the inner circumference on the ring or the measured circumference on the finger.
  3. Then compare the length with our ring size chart to find your ring size.

Circumference

51mm - 2XS

53mm - XS

55mm - S

58mm - M

60mm - L

63mm - XL

66mm - 2XL

Use our ringsize measurer

We offer a ringsizer that you can use to accurately determine your ring size.

Order a ringsizer


How to use the ringsizer:

  1. Decide in advance which finger you want to wear the ring on.
  2. Insert the end through the slot of the indicator window.
  3. Place the ring sizer around the finger and tighten the loop so that it fits comfortably on the finger. The ring should not be too tight afterwards. Of course, it should not be too loose either, so that it does not slip off.
  4. Read the circumference in the display window of the multisizer.

Circumference

51mm - 2XS

53mm - XS

55mm - S

58mm - M

60mm - L

63mm - XL

66mm - 2XL

Use an existing ring

If you already have a ring that fits well, you can use the size of that ring to determine your ring size.

  1. Simply measure the inside diameter of the ring on a ruler and round up to the nearest millimetre.
  2. Then compare the length with our ring size chart to find your ring size.

Diameter

16mm - 2XS

16,9mm - XS

17,5mm - S

18,5mm - M

19,1mm - L

20,1mm - XL

21mm - 2XL

Find your bracelet size

Generally, the bracelet length is the measured wrist circumference plus 2cm. If you are between two sizes or prefer a looser fit, we recommend the next size up.

Use an existing bracelet
  1. Option: Measure the whole length
    Place the bracelet in a straight line on a flat surface. Measure the bracelet from one end to the other and note the length.
  2. Option: Measure a closed bracelet
    Place the bracelet closed on a flat surface and measure its length from end to end. Then double this measurement and note the length.
Use a tape measure or string

If you don't have a bracelet for reference, you can use a tape measure or string to determine the perfect length.

  1. Option: With a tape measure
    Turn your open palm upwards and place the tape measure around your wrist under the carpal bone. Note the measured wrist circumference.
  2. Option: With a string
    Turn your open palm upwards and place the string around your wrist under the carpal bone. Mark the point where the ends meet. Next, lay the string flat in front of you and measure the length to the marked point.

Find your necklace size

Use an existing necklace

If you already have a necklace of the right length, measure it to find out the size of the new necklace. There are two ways to measure a necklace.

  1. Option: Measure the whole length
    Lay the necklace in a straight line on a flat surface. Measure it from one end to the other and note the length.
  2. Option: Measure a closed chain
    Place the necklace closed on a flat surface and measure its length from end to end. Then double this measurement and note the length.
Use a tape measure or string

If you don't have a necklace for reference, you can use a tape measure or string to determine the perfect length.

  1. Option: With a tape measure
    Put the tape measure around your neck like a necklace. Adjust the tape measure to the desired length and note the measurement.
  2. Option: With a string
    Put a string around your neck like a necklace, set the desired length and mark where the ends meet. Then measure the string and note the length.

Cart

No more products available for purchase

Your Cart is Empty